Home page

Solar-type modular polyether

YTYN series combination polyether polyols are polyurethane foam insulation specially designed for solar water tanks, which contain the raw materials and all the additives required to produce rigid polyurethane foam in addition to blowing agents.

Product Classification:

Rigid Foam Insulation

Key words:

Product inquiry

Detailed introduction

Performance and applications

The foam properties of this combined polyether material are as follows:

——— low odor during foaming

——— good mobility

The ——— density is evenly distributed

——— good compressive strength

——— good dimensional stability

——— low thermal conductivity

——— small packing density

wrap

220kg/drum

Safe operating measures

Wear rubber gloves, goggles and protective clothing during operation. The working environment needs to be well ventilated and should be thoroughly cleaned after operation. Store in a closed container, separated from water in the air, protected from direct sunlight and away from heat sources.

Handling and storage

YTYN series combination polyethers are polyol-based mixtures containing a small amount of tertiary amine catalysts. Since it is alkaline, YTYN can cause mild to moderate discomfort, especially in prolonged direct contact with skin, eyes and respiratory tract films. Goggles and protective gloves should be worn at all times when handling this product in direct contact with the potential for direct contact. The product splashed into the eyes should be immediately rinsed with plenty of water, if irritation or discomfort persists, seek medical attention immediately, the product splashed into the skin should be removed immediately to avoid continuous contact with the skin, and should be thoroughly washed before reuse.

Typical performance

project	unit	index
appearance		Light yellow to brownish yellow transparent liquid
Hydroxyl value	mg KOH/g	350-450
moisture content	Weight percentage	0.5-2.5
viscosity	mPa·s	1000-4500
density	20℃ g/cm3	About 1.05

Shelf life

Under suitable storage conditions, the storage period of YTYN series combined polyether polyols is six months. Products that exceed the shelf life and physical and chemical properties are within the scope of indicators, which generally do not affect their use performance.

Packaged shipment

Production equipment

Quality inspection